10. INSTALL THE SCIENCE INSTRUMENTS.

• Apply glue to the outboard end of the SCIENCE INSTRUMENT BOOM installed at hole G. Apply glue to the triangle printed on the GRS. Attach the GRS to the end of the boom, rotated so the GRS cylinder is vertical. Let the glue dry.

• Apply glue to the outboard end of the SCIENCE INSTRUMENT BOOM installed at hole M. Apply glue to the triangle printed on the MAG/ER. Attach the MAG/ER to the end of the boom, rotated so panel C faces up. Let the glue dry. Straighten the member that points straight out from the MAG/ER's rectangular box.

• Apply glue to the outboard end of the SCIENCE INSTRUMENT BOOM installed at hole A. Apply glue to the triangle printed on the APS. Attach the APS to the end of the boom, rotated so panel C faces up. Let the glue dry.

  ---

  | CONTINUE |