6. INSTALL THE MINUS-Z THRUSTERS.

• Release one of the AFT THRUSTERS from Parts Sheet B. Insert its T-top white tab into one of the slots on the BUS BOTTOM. The piece should be rotated so that the black object (which represents the actual thruster) is on the side closer to the G printed on the SPACECRAFT BUS wall.

• Repeat with the other AFT THRUSTER. When installed properly, an imaginary line between the two black thrusters will bisect the circular hole in the BUS BOTTOM.

  ---

  | GO ON TO THE NEXT STEP |
  
  | INSTRUCTIONS FIRST PAGE |