* 7. ASSEMBLE THE ATMOSPHERIC PROBE

• Release the PROBE TOP from sheet B. Apply glue between the white line and the V-shaped cut, and overlap the other side onto it to form a cone.

• Release the PROBE BOTTOM from sheet A, apply glue to the crosshatched segment, overlap and form a cone as above, with the gold facing out. When dry, blunt the gold point of the cone slightly by rubbing it on a hard surface with your finger inside the cone.

  

• Place the PROBE TOP over the PROBE BOTTOM. Glue the three tabs down over the bottom section. Apply a thin bead of glue all the way around the seam and hold together until dry.