|   SCI HOME PAGE   |   CATALOG   |   GREAT SPACE LINKS   |   FAQ   |

6. INSTALL THE MINUS-Z THRUSTERS.

View the whole assembled model

    Minus Z thrusters attached

  • Cut out the last remaining parts, the -Z THRUSTERS from Sheet 2. Fold tab Z over 90 degrees to form a stand.

  • Glue the thrusters, at the base where tab Z is, to the bottom of the SPACECRAFT BUS. There is a small rectangle printed where the thrusters attach. Rotate each one so its pipe-shaped appendage faces in the -X direction.


    | GO ON TO THE NEXT STEP |

    | INSTRUCTIONS FIRST PAGE |